Please use this identifier to cite or link to this item: http://theses.ncl.ac.uk/jspui/handle/10443/4740
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSunny, G A. M. Ali Imam-
dc.date.accessioned2020-09-16T09:18:37Z-
dc.date.available2020-09-16T09:18:37Z-
dc.date.issued2017-
dc.identifier.urihttp://theses.ncl.ac.uk/jspui/handle/10443/4740-
dc.descriptionPh. D Thesisen_US
dc.description.abstractDespite of immense research over the years, defect monitoring in harsh environmental conditions still presents notable challenges for Non-Destructive Testing and Evaluation (NDT&E) and Structural Health Monitoring (SHM). One of the substantial challenges is the inaccessibility to the metal surface due to the large stand-off distance caused by the insulation layer. The hidden nature of corrosion and defect under thick insulation in harsh environmental conditions may result in it being not noticed and ultimately leading to failures. Generally electromagnetic NDT&E techniques which are used in pipeline industries require the removal of the insulation layer or high powered expensive equipment. Along with these, other limitations in the existing techniques create opportunities for novel systems to solve the challenges caused by Corrosion under Insulation (CUI). Extending from Pulsed Eddy Current (PEC), this research proposes the development and use of passive Low Frequency (LF) RFID hardware system for the detection and monitoring of corrosion and cracks on both ferrous and non-ferrous materials at varying high temperature conditions. The passive, low cost essence of RFID makes it an enchanting technique for long term condition monitoring. The contribution of the research work can be summarised as follows: (1) implementation of novel LF RFID sensor systems and the rig platform, experimental studies validating the detection capabilities of corrosion progression samples using transient feature analysis with respect to permeability and electrical conductivity changes along with enhanced sensitivity demonstration using ferrite sheet attached to the tag; (2) defect detection using swept frequency method to study the multiple frequency behaviour and further temperature suppression using feature fusion technique; (3) inhomogeneity study on ferrous materials at varying temperature and demonstration of the potential of the RFID system; (4) use of RFID tag with ceramic filled Poly-tetra-fluoro-ethyulene (PTFE) substrate for larger applicability of the sensing system in the industry; (5) lift-off independent defect monitoring using passive sweep frequency RFID sensors and feature extraction and fusion for robustness improvement. This research concludes that passive LF RFID system can be used to detect corrosion and crack on both ferrous and non-ferrous materials and then the system can be used to compensate for temperature variation making it useful for a wider range of applications. However, significant challenges such as permanent deployment of the tags for long term monitoring at higher temperatures and much higher standoff distance, still require improvement for real-world applicability.en_US
dc.description.sponsorshipEngineering and Physical Sciences Research Council (EPSRC) CASE, National Nuclear Laboratory (NNL).en_US
dc.language.isoenen_US
dc.publisherNewcastle Universityen_US
dc.titlePassive low frequency RFID for non-destructive evaluation and monitoringen_US
dc.typeThesisen_US
Appears in Collections:School of Engineering

Files in This Item:
File Description SizeFormat 
Sunny, G 2017.pdfThesis6.48 MBAdobe PDFView/Open
dspacelicence.pdfLicence43.82 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.