Please use this identifier to cite or link to this item: http://theses.ncl.ac.uk/jspui/handle/10443/2771
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAbdullah, Sureena Binti-
dc.date.accessioned2015-08-12T15:14:44Z-
dc.date.available2015-08-12T15:14:44Z-
dc.date.issued2014-
dc.identifier.urihttp://hdl.handle.net/10443/2771-
dc.descriptionPhD Thesisen_US
dc.description.abstractThe main objective of this study is to investigate on the ability of a perovskite-based membrane reactor to produce hydrogen via simultaneous reforming and water splitting processes. Being able to perform such processes will confirm on the ability of the membrane system in performing an autothermal production of hydrogen. Initial experiments were conducted to evaluate the ability of two different types of hollow fibre membrane namely La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF6428) and Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF5582) in permeating oxygen in three different inlet configurations. All of the experiments were conducted at 900oC. The LSCF6428 membrane gives lower oxygen permeation rate comparing to BSCF5582 when inert gas argon was used as the sweep gas on the shell side of the membrane. The oxygen permeation rate into the shell side of LSCF6428 membrane reactor was at 0.24μmolO.s-1 whereas for BSCF5582 was at 1.50μmol O.s-1. The trend is similar when the shell sides were fed with 5% methane and the lumen sides were fed with 10% oxygen. In these experiments, both membranes were stable enough to perform oxygen permeation up to more than 100 hours of operation. BSCF5582 membrane however shows instability in performing oxygen permeation when the lumen side was fed with 4% water and shell side was fed with 5% methane. BSCF5582 membrane was only able to perform oxygen permeation for less than two hours before showing substantial amount of leaks upon breaking. In contrast, the iii LSCF6428 membrane shows good stability in the same condition with the shell side oxygen permeation rate of 0.04±0.01μmolO.s-1. The experiment operating time lasted for more than 90 hours. Based on its stability in performing oxygen permeation in the combination of highly reducing and highly oxidising environment, the LSCF6428 membranes were chosen to perform the simultaneous methane reforming and water splitting process in a multiple-membrane based reactor. The results obtained from this experiment proved that simultaneous methane reforming and water splitting can be achieved using a membrane reactor.en_US
dc.description.sponsorshipUMP and KPM staffs for the scholarshipen_US
dc.language.isoenen_US
dc.publisherNewcastle Universityen_US
dc.titleHydrogen production via simultaneous methane reforming and water splitting processes using membrane reactoren_US
dc.typeThesisen_US
Appears in Collections:School of Chemical Engineering and Advanced Materials

Files in This Item:
File Description SizeFormat 
Abdullah, S 2014.pdfThesis5 MBAdobe PDFView/Open
dspacelicence.pdfLicence43.82 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.